Project: Eutanasia

Small Aluminum Case with Water Cooling
Author: Toni Siik
Published: 14.01.2008
In English In English
Suomeksi Suomeksi


Early on in the build I decided that I wanted to keep the lighting of the case fairly minimal. In addition to the 2 led-fans on the front I added just two white cathodes to the case. One lights up the "eutanasia"-logo on the side and the other lights up the inside of the case.


Just testing what the cathode would look like behind the logo.

Beating the Deadline



So I finished the case in time for the Assembly 07 LAN-party. To my amazement I actually did fairly well with this case in the "Coolest case" competition and placed 3rd. Picture on the left was taken by Aki Korhonen at Assembly07.

The Case At the Moment

After using the case for almost half a year now it has been through some changes. The case itself really was finished just a couple of days ago.

I added another hole on the top for the fillport and I swapped out all of the m3 screws for some bigger m4 screws. Even most of the components from inside the case have been changed.

Nowadays the case houses a system with a DFI Blood-iron motherboard, an Intel Q6600 G0 processor that's working at 3.4 GHz, 2GB of G.Skill memory and an Nvidia 8800 GTX.


Here's a picture of the coolingloop as it is now.

Pages:  1 2 3 4 5 6 7 8 9 

  Content in english!
  Sisältö suomeksi!


En ota mitään vastuuta tuhoutuneesta tai hajonneesta laitteistosta tai sen osasta.

Disclaimer! I will not take any responsibility for any destroyed or damaged hardware.

 .:Back to top Bandwidth by Mpoli

Copyright ©, All Rights Reserved.
All content and graphics in MetkuMods are sole property of Jani Pönkkö and may not be reproduced or copied in any manner without written permission from him.
All brand names, trademarks and copyrights are the property of their respective owners.Privacy Policy