Author: Jani 'Japala' Pönkkö
Published: 15.05.2005
How difficult: 1 Dremel - Easy ; 5 Dremels - Difficult
Time to finish: Total: 40 minutes
Cost: Pez: 4 euros
Flash: ~30 euros
In English In English
Suomeksi Suomeksi

The Cow


Cow + 128 MB

I've never seen furry PEZ dispensers before and this keyring version was a must buy. Perhaps I can give this as a present for my wife after the article is done. Girls seem to have a soft spot for something like this. :)



Plastic on this model is thinner so it is easier to force the mechanism out from the casing. Same goes for the head too as it was really easy to pull out. This particular PEZ is a PEZ Mini dispenser so it is shorter as those regular ones. Just make sure your USB Memory Stick isn't overly long and can fit inside the body of the dispenser.


Thinner USB Stick

The whole body of this memory stick even with the casing is thinner than the Soyo stick that I used with The Incredibles version, there is no need to take it apart. Just dremel the top part of the stick flat and use good amount of grazy glue or hot glue and you are done. Naturally this is not the case with every memory stick as there are so many different shapes and sizes available. But as you can see, with a drive that has small dimensions you can avoid all the hard work. It is also a lot safer as you avoid the physical contact with the PCB of the memory stick thus preventing possible static discharges that might ruin the drive.



Up and running. Every file stored to the drive are still there so everything worked as planned.

Pages:  1 2 3 4 5 

  Content in english!
  Sisältö suomeksi!


En ota mitään vastuuta tuhoutuneesta tai hajonneesta laitteistosta tai sen osasta.

Disclaimer! I will not take any responsibility for any destroyed or damaged hardware.

 .:Back to top Bandwidth by Mpoli

Copyright ©, All Rights Reserved.
All content and graphics in MetkuMods are sole property of Jani Pönkkö and may not be reproduced or copied in any manner without written permission from him.
All brand names, trademarks and copyrights are the property of their respective owners.Privacy Policy