Metku Pinball

World first water cooled Pinball machine!

Author: Jani 'Japala' Pönkkö
Published: 16.01.2012
In English In English
Suomeksi Suomeksi



The end

So, there you have it. It was fun to build this most of the time eventhough I did start to feel the added pressure of the schedule. This might be the last large build that I do to the Assembly event... Partly because the next June will be spent traveling the US. On the other hand it doesn't take much to get the spark to start designing and hammering away a new creation!

I could have taken the pinball machine to the next level by adding bunch of solenoids, rumble engines, lights etc. but for my personal use the end results was more than enough. There are article on the net on how to build machines like this but one needs to have the drive to combine the different approaches to one that feels right. For example on the software front, everything feels like a big mess. Emulators are ready but you need to combine several scripts and different programs together to get the needed end-result. Hopefully someone will take on the job and build an all-in-one package as when comparing the work hours that I spend on this project, tinkering with the software took almost as long as did the build on the box itself.

In the end, I would like to thank the sponsors one more time and naturally, thank you for your interest towards my project. I'm happy to answer any questions that you may have!

Pages:  1 2 3 4 5 6 7 8 9 10 11 12 13 14 

  Content in english!
  Sisältö suomeksi!


En ota mitään vastuuta tuhoutuneesta tai hajonneesta laitteistosta tai sen osasta.

Disclaimer! I will not take any responsibility for any destroyed or damaged hardware.

 .:Back to top Bandwidth by Mpoli

Copyright ©, All Rights Reserved.
All content and graphics in MetkuMods are sole property of Jani Pönkkö and may not be reproduced or copied in any manner without written permission from him.
All brand names, trademarks and copyrights are the property of their respective owners.Privacy Policy