|
|
In English
Suomeksi
Here we get a closer look at the microphone boom and the hinge area. The microphone boom rotates so that it can be turned out of way and off at the same time. The boom itself is flexible so that you can position it to you own liking.
Here we have a closeup picture of the microphone. Nothing surprising here.
Transceiver
Here we have the transceiver. Really doesn't have anything extra nor should it have. Its fairly small and it only has one button and two cords. One cord for the USB-plug and one for recharging the headset. The button on the receiver is used to sync the headset to the transceiver. This happens by pressing the power button and the transceivers button at the same time. This way you shouldn't get any unwanted listeners on your headset nor should you have to listen to someone elses sounds.
One good feature that Creative has come up with this headset is the fact that you still use the headphones even if you need to recharge them. Just plug in the power-cord and your ready to go. In practice however I found the power-cord way too short for it to reach comfortably to the headset when the transceiver is connected to an USB-port that is behind the case. I really think the USB-cord could be shortened a little, bit and the power-cord should be extended by around half a meter or so.
 | Pages: 1 2 3 4 5 |  |
Content in english!
Sisältö suomeksi!
