Xigmatek Battle-Axe

High performance GPU Cooler
Author: Jouni 'Jipa' Vasama
Published: 02.05.2008
Manufacturer: Xigmatek
Product Group: Cooling
In English In English
Suomeksi Suomeksi


Not too long ago we tested Xigmatek's CPU heatsinks, one of which featured a new HDT or Heatpipe Direct Touch base where the heatpipes are exposed and have direct contact with the CPU. The HDT-S1283 proved to be an excellent cooler and now Xigmatek has launched a new graphic card cooler that uses a similar HDT base.

Battle-Axe VD964


Xigmatek Battle-Axe

The Battle-axe comes in a see-through package that shows the fan shroud and the base of the cooler. There are also specification printed to the back side of the packet so Xigmatek once again has managed to make a good and informative packet for their product.

Product Name

Outside Dimension

‧ Dimension 194(W) x 110(H) x 32.4(D) mm

Heat Sink

‧ Material
Aluminum Alloy
‧ Heat-pipe

Φ6mm x 4pcs


‧ Dimension 92(W) x 92(H) x 25(D) mm
‧ Voltage Rating 12V
‧ Speed 2200 R.P.M. (±10%)
‧ Bearing Type Hypro Bearing
‧ Air Flow 40.2 CFM
‧ Air Pressure 0.078 inH2O
‧ Life Expectance 40,000 hrs
‧ Noise Level 20~28 dBA
‧ Connector 3 Pin


617g (w/fan)


‧ nVIDIA® GeForce® 8800 / 7900 / 7800 Series
‧ ATI Radeon™ X1950 / X1900 / X1800 Series



Xigmatek Battle-Axe

The bundle of the Battle-Axe contains four rubber pins for the fans, an user's manual, two installation brackets, two long and six small memory heatsinks, a bag of mounting screws, a small bag of thermal paste, a 3-pin power splitter for the fans and a heatsink for a bridge chip on some graphic cards.

Pages:  1 2 3 4 

  Content in english!
  Sisältö suomeksi!


Add to Technorati Favorites

 .:Back to top Bandwidth by Mpoli

Copyright ©, All Rights Reserved.
All content and graphics in MetkuMods are sole property of Jani Pönkkö and may not be reproduced or copied in any manner without written permission from him.
All brand names, trademarks and copyrights are the property of their respective owners.Privacy Policy