MetkuMods

Select a category

Audio (17)
Cooling - CPU (22)
Cooling - GPU (2)
Cooling - misc (10)
CPUs (8)
Displays (5)
Enclosures (58)
Full systems (2)
Graphics cards (29)
Keyboards (19)
Memory (5)
Mice (27)
Miscellaneous (16)
Modding (10)
Motherboards (13)
Mouse mats (7)
Networking (3)
Peripherals (1)
Power supplies (10)
Storage (27)

Memory

6-way DDR3 Memory Roundup 
Our goal was to get some of the highest-performing memory kits and pit them against each other over various different benchmarks. This time we are mainly going to concentrate on the performance of the kits, not the technology behind them. The people at CSX, Patriot, Crucial, G.Skill, Mushkin and Corsair were nice enough to send us something to test. Now that the contenders were sorted out we can get busy...
6-way DDR3 Memory Roundup
Mushkin vs. Corsair 
Two DDR2 Dual Channel kits go head to head.
Mushkin vs. Corsair
Kingston HyperX PC3500 
Truly extreme memory modules with great overclockability.
Kingston HyperX PC3500
Corsair XMS4000 Twinx 
Lightning fast PC4000 TwinX DDR memory from Corsair.
Corsair XMS4000 Twinx

 
  Content in english!
  Sisältö suomeksi!

 Google

 .:Best from AllTheMods.com
AMD athlon 64 x2 4800+, 1024MB DDR2, 320GB maxtor, GeForce 6600, 6
My first computer case mod: iZenith. I won the first place of "The Coolest Case" competition in Assembly 2009 (summer). There were 18 participants, of which I sadly saw only three cases.

The main materials for this case are:
- plywood
- 2" by 2" pine
- 1mm brass plate

Surface and insides spraypainted (with can).

Measurements:
457mm(W) x 206mm(H) x 287(D)Robot got updated. Now it has a aluminum body instead of plywood, new motors (360 degree hacked standard servos and also the circuit boards are stripped off to allow direct control with a H-bridge), new tires and a wireless webcam (unfortunately not my own, just for testing).

The "brain" is the same old ATmega8 -board as it was in the old robot, also the bump and IR proximity sensors are the same. I attached a wireless keyboard+mouse receiver to control the robot with a keyboard (the operating range with this set is quite small, but it is still quite funny to control it with a keyboard). Don't mind about the big pile of wrapped wire coming from the receiver, because it is for testing purposes at the moment (I'm looking for another set of wireless keyboard+receiver so I can modify the receiver to have a better antenna and a shorter cable between the receiver and microcontroller).

At the moment it has two 9V batteries (one for the camera and the other is for the 5V regulator for the electronics) and four rechargeable AA cells for the motors.

EDIT: And it can wander around autonomously and avoid obstacles (well, atleast most of them)

 .:Latest forum topics
Alter the input voltage
Replies: 0
Flightline
Replies: 2
LCD-näytön ohjaus AVR:llä
Replies: 0
TFT-näytöstä mittaristo?
Replies: 0
Arduino
Replies: 0
Langattoman hiiren paristoista eroon.
Replies: 5
CarPC/muusikkikirjaston syknronointi
Replies: 3

 .:Top Sponsors
Corsair
Antec
AMD
Dremel
HIS Digital
Sapphire

 .:Affiliates
AllTheMods
Bit-Tech
Case-Gallery (GER)
Digit Life
Digital Silence
Futurelooks
JAT Hardware (FIN)
Kande.be (BEL)
LedCalc
Marns CDA
ModTheBox
OCModShop
OzCaseModz
PC Modding Malaysia
Primotechnology
R&B Mods
SweMOD
Teknolelu (FIN)
TwistedMods.com
UMLan
Viperlair
Virtual-Hideout




 .:Back to top Bandwidth by Mpoli

Copyright © Metku.net, All Rights Reserved.
All content and graphics in MetkuMods are sole property of Jani Pönkkö and may not be reproduced or copied in any manner without written permission from him.
All brand names, trademarks and copyrights are the property of their respective owners.Privacy Policy