MetkuMods

Select a category

Audio (17)
Cooling - CPU (22)
Cooling - GPU (2)
Cooling - misc (10)
CPUs (8)
Displays (5)
Enclosures (58)
Full systems (2)
Graphics cards (29)
Keyboards (19)
Memory (5)
Mice (27)
Miscellaneous (16)
Modding (10)
Motherboards (13)
Mouse mats (7)
Networking (3)
Peripherals (1)
Power supplies (10)
Storage (27)

Motherboards

AMD 890GX
Gigabyte vs. ASRock
 
Two motherboards with AMD's 890GX chipset goes head to head to see which one takes the top spot.
AMD 890GX<br>Gigabyte vs. ASRock
MSI P55-GD80 
The GD80 is one of MSIs top offering for the users that want to use the newest LGA1156 socket CPUs.
MSI P55-GD80
iBASE MB870 P4 Mini-ITX Motherboard 
VIA EPIA killer? Intel P4 power combined with ATi's RS300M Chipset.
iBASE MB870 P4 Mini-ITX Motherboard
Epox 8HDA3+ 
Quality Athlon 64 board with six SATA ports.
Epox 8HDA3+
Shuttle AN50R 
Athlon 64 board with great overclockability.
Shuttle AN50R
Albatron K8X800 Pro II 
Athlon64 motherboard - Offering good stability and lots of features.
Albatron K8X800 Pro II
DFI Infinity 875 
Great overclocker with an extensive feature set.
DFI Infinity 875
Albatron PX865PE ProII 
Stable and full-featured board for Intel CPUs.
Albatron PX865PE ProII
Epox EP-4PDA2+ 
I865PE board with extended storage options and great OC potential.
Epox EP-4PDA2+
Asus P4P800 
Probably the fastest I865PE motherboard around!
Asus P4P800
DFI KT400A LanParty 
Great looking board with lot of features.
DFI KT400A LanParty

 
  Content in english!
  Sisältö suomeksi!

 Google

 .:Best from AllTheMods.com
Specs:

CPU: Opteron 170 @ 2,4Ghz
GPU: 8800GTS
RAM: 2GB ECC
HDD: 320GB 
MOBO: Asus A8N-VM CSM
CASE: diy
SIZE: 376x158x264mm

More pictures: http://www.lanita.org/~willek/temp/Vekankotelo/yay..
I found 10 meters of nice aluminum profile from garbage and built a spotlight system from it. 12v current is fed through cable wires and 3 springs keep the wires tight. Halogens and transformer are from Ikea.My DIY projector at the moment. I used a 15" TFT (1024x768) and an old OHP. So far the project has cost about 0 because I got the screen and the OHP for free. The TFT panel is cooled with two 8cm fans (the little pieces of tape and paper are just for testing the cooling until I cut the missing pieces for it).

I noticed that the OHP is almost completely same as the one willek used in his DIY projector, only the front panel is different. The lamp is a 24V/250W halogen.

The projector isn't fully finished yet because I'll paint the used plywood and other parts black and cut some light masks, maybe from a thick black fabric.

 .:Latest forum topics
Alter the input voltage
Replies: 0
Flightline
Replies: 2
LCD-näytön ohjaus AVR:llä
Replies: 0
TFT-näytöstä mittaristo?
Replies: 0
Arduino
Replies: 0
Langattoman hiiren paristoista eroon.
Replies: 5
CarPC/muusikkikirjaston syknronointi
Replies: 3

 .:Top Sponsors
Corsair
Antec
AMD
Dremel
HIS Digital
Sapphire

 .:Affiliates
AllTheMods
Bit-Tech
Case-Gallery (GER)
Digit Life
Digital Silence
Futurelooks
JAT Hardware (FIN)
Kande.be (BEL)
LedCalc
Marns CDA
ModTheBox
OCModShop
OzCaseModz
PC Modding Malaysia
Primotechnology
R&B Mods
SweMOD
Teknolelu (FIN)
TwistedMods.com
UMLan
Viperlair
Virtual-Hideout




 .:Back to top Bandwidth by Mpoli

Copyright © Metku.net, All Rights Reserved.
All content and graphics in MetkuMods are sole property of Jani Pönkkö and may not be reproduced or copied in any manner without written permission from him.
All brand names, trademarks and copyrights are the property of their respective owners.Privacy Policy