Super Grip with
Plasti Dip

Author: Jani 'Japala' Pönkkö
Published: 09.08.2004
How difficult: 1 Dremel - Easy ; 5 Dremels - Difficult
Time to finish: min. 4 hours
Cost: ~15 euros/can


Again, the similar kind of problem that I had with the ShinyShuttle article. Mod or a Review? In the end, a stock product gets to be something different than what it was when we started, so I think that it justifies this to be a modding article. :)

Not so long time ago, one of our forum members suggested for me to take a look at the product we are about to test in this article; Plasti Dip. Article title says Super Grip but that just felt a good name for the article and have nothing to do with the Plasti Dip Internation's Super Grip product that is mainly used for fabrics. Anyway, in this modding article we will see what these rubber coating products can offer for modders, gamers and DIY people in general. As Corpes0 from our forum told us, Airsoft enthusiasts have been using similar products to improve grip on their airsoft guns. It should be only natural for this stuff to work on computer input devices too. Read on and see how it turned out.

The product


Spray or not to spray?

Plasti Dip can be bought in two different forms/containers; Liquid and Spray. Both of them are available in different colors though not all retailers stock all of them.

Colors available are:

    Clear / Transparent

The store that I visited had Clear in spray and Black, Blue and Red as liquid. I ended up choosing one spray can (clear) and one can of liquid rubber coating for this article. Price for the products were around 15 euros for each can.



"Haitallinen" = Harmfull, "Erittäin helposti syttyvä" = Extremely flammable and finally "Ympäristölle haitallinen" = Danger to environment. Fish swimming with backstrokes should be a pretty clear sign that these products are dangerous if not handled properly. In fact so dangerous that they can't be sended via regular post. As always, I don't take responsibility if you manage to harm yourself with these chemicals so read the label carefully and follow the instructions to the letter.

First test



As a first test subject I decided to use a regular adjustable wrench. This is one of the targets that these rubber coating products are meant for. Non-slip handle will make the tool easier and safer to use. Just take a piece of string or wire and dip the item inside the can so that all the areas you want to get covered are submerged. You could use for example a brush to apply the coating to the item.



After at least four hours of drying you get a smooth and rubbery finish on the tool. The coat isn't too thick but you can build up the thickness but dipping the tool to the can several times. Surface feels, well, rubber and it makes the handle and the tool very comfortable to use. A good result with metallic tool, what about input devices made out of plastic?

Pages:  1 2 3 4 5 

  Content in english!
  Sisältö suomeksi!


En ota mitään vastuuta tuhoutuneesta tai hajonneesta laitteistosta tai sen osasta.

Disclaimer! I will not take any responsibility for any destroyed or damaged hardware.

 .:Back to top Bandwidth by Mpoli

Copyright ©, All Rights Reserved.
All content and graphics in MetkuMods are sole property of Jani Pönkkö and may not be reproduced or copied in any manner without written permission from him.
All brand names, trademarks and copyrights are the property of their respective owners.Privacy Policy