MetkuMods


Nokia 6600
BL-6C Battery

Author: Jani 'Japala' Pönkkö
Published: 23.02.2005
How difficult: 1 Dremel - Easy ; 5 Dremels - Difficult
Time to finish: 5 minutes
Cost: 23 euros
In English In English
Suomeksi Suomeksi

Phone side


backside of 6600

This is the space that should house a bit thicker BL-6C battery. And yes, I have a 256 MB memory card to hold all the "useless" data like MP3s and Movies. :)


Back cover

On 6600 there is one thing that you can do to make more room for BL-6C. There is a foam pad on the inside of the back cover that you need to remove. This is needed with BL-5C to keep the battery from moving around too much when you move the phone but BL-6Cs increased size makes the pad useless.


Pad removed

I used a sharp knife to carve away the pad. The glue used to attach the pad to the cover was quite strong so you may not get the pad out as cleanly as you would hope for but as this side is not going to be visible when you assemble the phone again, it should not matter too much.



Pages:   1 2 3 



 
  Content in english!
  Sisältö suomeksi!


 Google

 .:Notice!
En ota mitään vastuuta tuhoutuneesta tai hajonneesta laitteistosta tai sen osasta.

Disclaimer! I will not take any responsibility for any destroyed or damaged hardware.





 .:Back to top Bandwidth by Mpoli

Copyright © Metku.net, All Rights Reserved.
All content and graphics in MetkuMods are sole property of Jani Pönkkö and may not be reproduced or copied in any manner without written permission from him.
All brand names, trademarks and copyrights are the property of their respective owners.Privacy Policy